Better Pack ® 555

Quality Replacement Parts for

Better Packages® 555

Top Heater

& Top Heater Components

TIGERSEAL PRODUCTS sales & service has specialized in tape machines since 1983. From sales to service to parts, we can assist you in making sure your packaging equipment runs smoothly. We bring over 27 years of field service experience. In addition to our online parts guide we also offer a complete section on maintenance and service for your Better Pack 555. 

We also provide toll free tech support that can help you solve problems. Call us toll free at 1-800-899-9389 to speak to a tape machine service specialist. Finally we do feature a complete line of new machines all featuring our exclusive 2 year full parts & labor warranty

NO minimum parts order  -fast shipping (most parts ship within 24 hours) - Quality Assurance - 1 year replacement guarantee

 back to Replacement Parts For Better Packages ®555  

Replacement Parts Links

Most Ordered Parts	Frames & Covers	Key Drum & related parts   key switches, caps etc	Measuring Wheels   parts inside key drum	Clutch Assemblies   inc rollers, feed wheels, etc	Solenoid & Cutter Parts
Upper & Lower Tape Plates	Tape Basket Area	Bottles & Brushes	Top Heater & Heater Components	Motor & Motor Brushes	Faxable Order Page

Top Heater Assemblies have remained constant over the years, however,

 there have been 3 different versions of the plug. The newer machines use a standard 3 prong plug (as shown in the picture below). Earlier machines used a circular plug and the earliest versions used no plug at all. The heater cord was wired directly into the side frame. Almost all Better Pack® 555 tape machines today use the current 3 pronged plug.

900SH3PPWXX

Available Components for Top Heater:

Top Heater Components

Parts Included in 800SHTHPLXK

1- Thermal Plate

1- Thermal Paste Tube

1- Butt Splice Connector

1- Heat Shrink Tube

2- Stainless Steel Screws for Heater Cover

Available Components for Top Heater:

Section 2:

Sub Assembly Parts for Top heater Lower Tape Plate

NOTE: 800SHLTPX includes all sub components pictured

Quality Parts You Can Count On

All parts include a full 1 year replacement guarantee against any defects in material or workmanship.

 All parts are manufactured by McDonald Company Machines Warminster PA.

TIGERSEAL PRODUCTS sales & service has specialized in tape machines since 1983. From sales to service to parts, we can assist you in making sure your packaging equipment runs smoothly. We bring over 25 years of field service experience. In addition to our online parts guide we also offer a complete section on maintenance for your tape machine. We also provide toll free tech support that can help you solve problems. Call us toll free at 1-800-899-9389 to speak to a tape machine service specialist. Finally we do feature a complete line of new machines all featuring our exclusive 2 year full parts & labor warranty

NO minimum parts order  -fast shipping (most parts ship within 24 hours) - Quality Assurance - 1 year replacement guarantee

Uncompromising  Standards

Before any part is shipped it is inspected. Shafts, gears, feed wheels, etc. are checked for inner/outer diameter specifications to insure an exact fit. Assemblies, such as Motors and Top Heaters and tested to insure that correct specifications are met. Spring tensions are checked. All of this is done to insure that the parts you order provide years of trouble free performance.

Stainless Steel

Parts that come into contact with the moistening brushes are now manufactured using stainless steel. Our lower tape plates and lower Top Heater Plates are made of stainless steel to eliminate rust corrosion. The stainless steel surface also resists glue build-up reducing routine maintenance.  All of our replacement screws and kep nuts are only made with stainless steel.

Cryogenic Processing

To further insure the quality of our parts, normal wear items are cryogenically treated to extend the parts useful life. After arrival from the manufacturer in Pennsylvania, we then ship the parts to Cryo Nebraska for cryogenic treatment.

Parts that are cryogenically treated include:

Upper Feed Wheels-Shear Kits-Shear Springs-Lower Feed Wheel & Shaft Assembly-Upper Feed Wheel Shafts-

Cryogenics

Our research into ways of improving performance of normal wear items revealed that deep cold treating parts improves the parts performance. Industrial cryogenics involves heat tempering the part 3 times to reveal any stress defects in the part. Next, the parts are placed in the deep cold treatment chamber. The chamber is sealed and the temperature is dropped to -300 degrees F over a period of 12 hours. Then it stays for 24 hours at -300 degrees F using liquid nitrogen (the liquid nitrogen never comes in contact with parts). When the parts have been at the proper temperature for the appropriate time,  after 24 hours the parts are  allowed  to come up to room temperature very slowly as not to damage anything.

The molecular structure is more uniform and dense. This results in a larger contact surface area that decreases wear and friction. Also, the process stress relieves the part eliminating potential failure points in the part. Both of these mechanisms combine to create a more durable and wear resistant part.

This is why all of the parts we offer include a full one year warranty against defects

 in material and workmanship and wear.

3 Easy Ways To Purchase

Click the "Buy Now" Link next to each item 

secure on line purchase               

Handy Fax Order Page

 safe   secure    FAST

Call Toll Free - 1-800-899-9389

 We accept major credit cards and will invoice net 30 with approved credit

Questions ? Call us toll free 1-800-899-9389