Better Pack ® 555
Tigerseal® Products - The Tape Machine Company since 1983
Since 1983
13093 Old Ridge Road Beaverdam Virginia 23015
1-800-899-9389
quality products - superior customer support
Quality Replacement Parts for
BETTER PACK® 555 REPLACEMENT PARTS & PRICES
Ordering Parts Is Easy! Call Us At 1-800-899-9389
or
Use The Handy Order Form on
Fax it to us at 1-804-227-3890
This section is organized to make it easy for you to find the parts you're looking for.
TIGERSEAL® PRODUCTS - Quality Parts and Service Since 1983
TIGERSEAL® PRODUCTS sales & service has specialized in tape machines since 1983. From sales to service to parts, we can assist you in making sure your packaging equipment runs smoothly. We bring over 25 years of field service experience. In addition to our online parts guide we also offer a complete section on maintenance for your Better Pack ® 555 tape machine. We also provide toll free tech support that can help you solve problems. Call us toll free at 1-800-899-9389 to speak to a tape machine service specialist. Finally we do feature a complete line of new machines all featuring our exclusive 2 year full parts & labor warranty
NO minimum parts order -fast shipping (most parts ship within 24 hours) - Quality Assurance - 1 year replacement guarantee
Uncompromising Standards
Before any part is shipped it is inspected. Shafts, gears, feed wheels, etc. are checked for inner/outer diameter specifications to insure an exact fit. Assemblies, such as Motors and Top Heaters and tested to insure that correct specifications are met. Spring tensions are checked. All of this is done to insure that the parts you order provide years of trouble free performance.
Cryogenic Processing
To further insure the quality of our parts, normal wear items are cryogenically treated to extend the parts useful life. After arrival from the manufacturer in Pennsylvania, we then ship the parts to Cryo Nebraska for cryogenic treatment.
Parts that are cryogenically treated include:
Upper Feed Wheels-Shear Kits-Shear Springs-Lower Feed Wheel & Shaft Assembly-Upper Feed Wheel Shafts-
Cryogenics
Our research into ways of improving performance of normal wear items revealed that deep cold treating parts improves the parts performance. Industrial cryogenics involves heat tempering the part 3 times to reveal any stress defects in the part. Next, the parts are placed in the deep cold treatment chamber. The chamber is sealed and the temperature is dropped to -300 degrees F over a period of 12 hours. Then it stays for 24 hours at -300 degrees F using liquid nitrogen (the liquid nitrogen never comes in contact with parts). When the parts have been at the proper temperature for the appropriate time, then after 24 hours it is allow to come up to temperature very slowly as not to damage anything. The tooling and or parts are tempered to the proper temperature three times.
The molecular structure is more uniform and dense. This results in a larger contact surface area that decreases wear and friction. Also, the process stress relieves the part eliminating potential failure points in the part. Both of these mechanisms combine to create a more durable and wear resistant part.
This is why all of the parts we offer include a full one year warranty against defects
in material and workmanship and wear.
back to Replacement Parts For Better Packages ®555
Links- Replacement Parts for Better Pack 555®
 most ordered parts |
 frames & covers |
 key drum & related parts key switches caps etc |
 measuring wheels parts inside key drum |
 clutch assy includes rollers/feed wheels etc |
 solenoid/cutter yoke/lower feed wheel shears (parts inside machine) |
 upper /lower tape plates |
 tape basket area |
 bottles brushes |
 top heater & top heater parts |
 motor & motor brushes |
 |
Click on the page.
Page 1: Most commonly used parts
Prices only on 13 most ordered parts
Page 2: Frames/Covers
front/rear covers, rubber feet, etc
Page 3: Key drum & related parts
Includes all parts associated with key drum- key switches, etc
Page 4: Measuring Wheels/safety switches & related parts
These are the parts located inside the key drum area
Page 5: Clutch Assembly
Includes clutch rollers, gears, upper feed shafts, etc
Page 6: Cutter Yoke/Solenoid/Lower Feed Wheel
These are the parts found inside the machine
Page 7: Upper & Lower Tape Plates
Includes pivot rods, retaining clips for heater & shear oiler
Page 8: Tape Basket Area
Side guides, etc.
Page 9: Bottles/Tanks/Brushes
New & old style water bottle, brackets, moistening brushes, & tank
Page 10: Top Heater & related parts
complete assy as well as internal components
Page 11: Motor Assy & related parts
Quality Parts You Can Count On
All parts include a full 1 year replacement guarantee against any defects in material or workmanship.
All parts are manufactured by McDonald Company Machines Warminster PA.
Quality Parts and Service Since 1983
Tigerseal Products sales & service has specialized in tape machines since 1983. From sales to service to parts, we can assist you in making sure your packaging equipment runs smoothly. We bring over 25 years of field service experience. In addition to our online parts guide we also offer a complete section on maintenance for your Better Pack ® 555 tape machine. We also provide toll free tech support that can help you solve problems. Call us toll free at 1-800-899-9389 to speak to a tape machine service specialist. Finally, of course, we do feature a complete line of new machines all featuring our exclusive 2 year full parts and labor warranty.
Ordering Is Easy!
Call Us At 1-800-899-9389
or
Use The Handy Order Form on Order Page
Fax it to us at 1-804-227-3890
For more information on these models, please call us at 1-899-899-9389.
TIGERSEAL ® PRODUCTS sales & service
13093 Old Ridge Road
Beaverdam VA 23015
Tigerseal Products is not affiliated with MCM/Phoenix
Tigerseal Products is not affiliated with Better Packages Inc